Classifieds

https://www.thomasskinner.com/wp-content/uploads/2020/10/roman-kraft-_Zua2hyvTBk-unsplash-Small-1200x600.jpg

Hitachi Sekei

Serial Number:VS-60190
Year of manufacture: 2003
Condition of Machine: Used/Good

Specifications

  • Fanuc CNC Control
  • Bridge Type Constructions
  • PCMCIA Card Slot
  • Automatic Tool Changer (ATC)
  • 12000 RPM
  • Powerful 30 hp high torque spindle motor
  • Spindler Chiller
  • RS-232 Port
  • Direct Tapping
  • Fast Rapid Traverse Rate
  • High-Pressure Coolant System with Tank
  • Chip Conveyor
  • Work light
  • Books and Manuals
  • Thru Coolant
  • High Pressure Jet Coolant
  • Work Offset Probe
  • Automatic Pallet Changer (APC)
  • X-Axis: 50.0”
  • Y-Axis: 24.0”
  • Z-Axis: 18.0”
  • 30 Tools ATC
  • CAT 40 Taper
  • Power 205-220V / 3-Phase
Price: $25,000 
Contact:

Vikram Vasdev

SIV Machining

sales@sivmachining.com

Tel: (778) 552-3612 

//www.thomasskinner.com/wp-content/uploads/2023/12/1000007661-rotated.jpg//www.thomasskinner.com/wp-content/uploads/2023/12/1000007654-rotated.jpg//www.thomasskinner.com/wp-content/uploads/2023/12/1000007655-rotated.jpg
//www.thomasskinner.com/wp-content/uploads/2023/12/1000007659-rotated.jpg//www.thomasskinner.com/wp-content/uploads/2023/12/1000007660-rotated.jpg//www.thomasskinner.com/wp-content/uploads/2023/12/1000007816-rotated.jpg

HAAS VF 1D

Serial Number: 1060307
Year of manufacture: 2007/2008
Condition of Machine: Excellent

Specifications

  • TravelsX: 20”Y: 16”Z: 20”
    Table SizeLength: 26”Width: 14”
    Spindle Motor Power Rating20 HP
    Spindle RPM7500 RPM
    Spindle Drive SystemDirect Drive
    Spindle Taper SizeCAT 40
    Tool Changer Type (e.g. carousel, side-mount)Carousel
    Tool Changer Capacity (# of tools)20 +1
    List Standard Equipment Included:
    I4th Axis wiring, Programmable Coolant
Price:USD $15,000 USD
Contact:

Des Bousfield

Integrity Pump Service Inc.

des.bousfield@integrityservice.com

Tel: 403-593-1568

Integrity Pump Service Inc - Classifieds Haas VF1D 1060307Integrity Pump Service Inc - Classifieds Haas VF1D 1060307Integrity Pump Service Inc - Classifieds Haas VF1D 1060307
Integrity Pump Service Inc - Classifieds Haas VF1D 1060307Integrity Pump Service Inc - Classifieds Haas VF1D 1060307Integrity Pump Service Inc - Classifieds Haas VF1D 1060307

HAAS TM2P & TRT100

Serial Number: 1123169 & 1123169
Year of manufacture: 2015
Condition of Machine: Excellent

Specifications

  • TravelsX: 40”Y: 16”Z: 16”
    Table SizeLength: 57.8”Width: 10.5”
    Spindle Motor Power Rating7.5 HP
    Spindle RPM6000 RPM
    Spindle Drive SystemDirect Speed Belt Drive
    Spindle Taper SizeCAT 40
    Tool Changer Type (e.g. carousel, side-mount)Carousel (Umbrella)
    Tool Changer Capacity (# of tools)20
    List Standard Equipment Included: 
    Intuitive Part Programming, Early Power Failure Detection Module
List Optional Equipment Included: 
Equipped with; Chip Auger, 20 Station ATC, Remote Jog Handle, Rigid Tapping, Spindle Orientation, Programmable Coolant Nozzle, 3/4HP High Flow Coolant Pump, 4TH Axis Drive & Wiring, 5th Axis Drive & Wiring and TRT100 5 Axis Tilting Rotary Table
Price:USD $55,000 OBO
Contact:

Eden Gallant

Scorpion Technologies

eden@controlgrips.com

Tel: 250.377.4399

Scorpion Classifieds Nov 3 2023Scorpion Classifieds Nov 3 2023Scorpion Classifieds Nov 3 2023
Scorpion Classifieds Nov 3 2023Scorpion Classifieds Nov 3 2023Scorpion Classifieds Nov 3 2023

Tai Piin Radial Arm drill

Serial Number: Unknown
Year of manufacture: Unknown
Condition of Machine: Good

Specifications

 

  • Table size: 23" x 46" fixed plus moveable 20.5" x 25" table
  • Spindle Motor Power: MT#4 3 HP
  • Spindle RPM: 44- 1500, 9" stroke
  • 57" long 33" wide
  • 4200 lb

Includes:

  • coolant pump

 

 

Price: $8,000 
Contact:

Scott Armstrong

GKD Industries Ltd.

Sarmstrong@gkdindustries.com

Tel: 403-723-8528

GKD industries classifiedsGKD industries classifieds
GKD industries classifieds

Wroclaw TUR 630A X 80” manual

Serial Number: 50485
Year of manufacture: 1994
Condition of Machine: GOOD

Specifications

Swing over Bed: 25"

Distance between Centers (max): 80”

Width of Bed: 17"

Spindle Bore / Spindle Nose: 5.5”/D1-11

Chuck Size: 12” Autoblok BBDB12

Spindle Motor Power Rating: 20 hp

Spindle RPM: 1400 rpm

Turret Style: 6.25” 4 way toolpost

List Standard Equipment Included:

Morse 5 Live center and Dead center, boring bar holder

List Optional Equipment Included:

Digital Readout, 900 lb machine mounted jib with hoist

 

Price: $9,500 
Contact:

Scott Armstrong

GKD Industries Ltd.

Sarmstrong@gkdindustries.com

Tel: 403-723-8528

//www.thomasskinner.com/wp-content/uploads/2023/12/GDK-Warclaw-6302.jpg
//www.thomasskinner.com/wp-content/uploads/2023/12/GDK-Warclaw-6301.jpg

Okuma LB 25 BB x 1250

Serial Number: 9478
Year of manufacture: 1994
Condition of Machine: GOOD

Specifications

Swing over Bed: 25.59”

Distance between Centers (max): 49.21”

Spindle Bore / Spindle Nose: 3.96”/ A-11

Chuck Size: 12” Autoblok BBDB12

Spindle Motor Power Rating: 20/30 hp

Spindle RPM: 2800 rpm

Turret Style: Bolt-on

List Standard Equipment Included:

Okuma OSP 5020L control, Tailstock with hydraulic quill, RS232 connection

List Optional Equipment Included:

Chip conveyor, High pressure coolant, Touch setter-M, Load monitor

 

Price: USD$20,000 
Contact:

Scott Armstrong

GKD Industries Ltd.

Sarmstrong@gkdindustries.com

Tel: 403-723-8528

//www.thomasskinner.com/wp-content/uploads/2023/12/Okuma2-scaled.jpg
//www.thomasskinner.com/wp-content/uploads/2023/12/Okuma1.jpg

Fadal 4525VHT

Serial Number: 032004015987
Year of manufacture: 2006
Condition of Machine: USED/ IN GOOD CONDITION

Specifications

Table Size: 48″ x 20″
Machine Travels (X/Y/Z): 45″ x 25″ x 32″
Table Capacity: 3,000 Lbs.
Transmission: High-Torque
Rapid Traverse Rate (X/Y/Z): 900 IPM
Maximum Cutting Feed Rate: 400 IPM
Tool Changer Style: Side Mount Twin Arm
Tool Changer Capacity: 24
Spindle Drive: 15HP Vector Drive
Spindle to Table Distance: 4″ – 24″
Electrical: 230V/3PH
Spindle Taper: CAT 40
Length x width x height: 23′ L x 8′ W x 9′ H
Weight: 12,000 Lbs.

Fanuc CNC Control, 24 station Twin-Arm Automatic Tool Changer, Thru Coolant System, Chip Conveyor

 

Price: $18,000 USD
Contact:

Adam Bendfeld

Canam Tool & Engineering Inc.

canamtool@shaw.ca

Tel: (604) 888-7699

Fadal 4525VHT_classifieds_Canam Tool & Engineering Inc._greg_oct 16 2023Fadal 4525VHT_classifieds_Canam Tool & Engineering Inc._greg_oct 16 2023
Fadal 4525VHT_classifieds_Canam Tool & Engineering Inc._greg_oct 16 2023Fadal 4525VHT_classifieds_Canam Tool & Engineering Inc._greg_oct 16 2023

Fadal 3016

Serial Number: 012000081141
Year of manufacture: 2000
Condition of Machine: USED/ IN GOOD CONDITION

Brand: Fadal
Model: VMC 3016
Approx. Shipping Weight: 8,300 Lbs.
Approx. Shipping Dimensions: 98″ L x 100″ W x 104″ H
Loading Fee: Rigging Required

Specifications

X Axis Travel: 30″
Y Axis Travel: 16″
Z Axis Tavel: 20″
Table Size: 39″ x 16″
Table Load Capacity: 2,736 Lbs.
Spindle Speed Range: 7500 RPM
Spindle Taper: Cat 40
Spindle HP: 12.5 HP
Spindle Center to Column: 16″
Rapid Feed Rate (X,Y): 900 IPM

Equiped With:

Fadal CNC 88HS, 7,500 RPM Spindle, 21 Station Tool Changer

DC direct drive 4th axis, under power, 7500rpm spindle

 

Price: $15,000 USD
Contact:

Adam Bendfeld

Canam Tool & Engineering Inc.

canamtool@shaw.ca

Tel: (604) 888-7699

Fadal 3016_classifieds_Canam Tool & Engineering Inc._greg_oct 16 2023Fadal 3016_classifieds_Canam Tool & Engineering Inc._greg_oct 16 2023
Fadal 3016_classifieds_Canam Tool & Engineering Inc._greg_oct 16 2023Fadal 3016_classifieds_Canam Tool & Engineering Inc._greg_oct 16 2023

Okuma Crown L1060

Serial Number: 1471
Year of manufacture: 2002
Condition of Machine: USED/ IN GOOD CONDITION

Specifications
Turning: 500.4 mm
Turning Ø: 269.2 mm
Ø above the bed: 551.2 mm
Ø above transversing slide: 500.4 mm
Length between centers: 500.4 mm
Type of CNC: OKUMA OSP700L
X-axis: 185.4 mm
Z-axis:520.7 mm
Spindle taper: A2-8
Spindle bore: 81.3 mm
Number of turrets:1
Number of tools on turret: 12
Number of rotating tools: 0
Turning speed: 4200 rpm
Spindle motor power: 11.2 kW
Length x width x height: 2641.6 × 1778.0 × 1778.0
Weight: 4537.2 kg

 

Price: $12,000 USD OBO
Contact:

Adam Bendfeld

Canam Tool & Engineering Inc.

canamtool@shaw.ca

Tel: (604) 888-7699

Okuma Crown L1060. _classifieds_Canam Tool & Engineering Inc._greg_oct 16 2023Okuma Crown L1060. _classifieds_Canam Tool & Engineering Inc._greg_oct 16 2023
Okuma Crown L1060. _classifieds_Canam Tool & Engineering Inc._greg_oct 16 2023Okuma Crown L1060. _classifieds_Canam Tool & Engineering Inc._greg_oct 16 2023

MODERN MM800

Serial Number: 122123077
Year of manufacture: 2012
Condition of Machine: USED/ IN GOOD CONDITION

Specifications
Travels: X: 31.5”, Y: 20”, Z: 20”
Table Size: Length: 35”, Width: 20”

Table Size: 750mm L x 500mm W x 400mm H
Spindle Motor Power Rating: 7.33/10 HP (Continuous / 30 Min)
Spindle RPM: 10000 RPM
Spindle Taper Size: Cat40
Tool Changer Type: ATC system ATC type WITH 24 TOOL STATION
Tool Changer Capacity : 24

Features & Included Equipment

- CHIP CONVEYER

- TRANSFORMER

- HIGH PRESSURE THROUGH COOLANT 20 BARS

Price: $50,000.00 OBO
Contact:
ANDREW DALBOCK/KOLE AMOS
XACT ENGINEERED MANUFACTURING SOLUTIONS

a.dalbock@xactems.com

403-291-9175 EXT 204

XACT ENGINEERED MANUFACTURING SOLUTIONS MODERN MM800 122123077XACT ENGINEERED MANUFACTURING SOLUTIONS MODERN MM800 122123077XACT ENGINEERED MANUFACTURING SOLUTIONS MODERN MM800 122123077XACT ENGINEERED MANUFACTURING SOLUTIONS MODERN MM800 122123077XACT ENGINEERED MANUFACTURING SOLUTIONS MODERN MM800 122123077
XACT ENGINEERED MANUFACTURING SOLUTIONS MODERN MM800 122123077XACT ENGINEERED MANUFACTURING SOLUTIONS MODERN MM800 122123077XACT ENGINEERED MANUFACTURING SOLUTIONS MODERN MM800 122123077XACT ENGINEERED MANUFACTURING SOLUTIONS MODERN MM800 122123077XACT ENGINEERED MANUFACTURING SOLUTIONS MODERN MM800 122123077

Kao Ming KMR-1100S

Serial Number: R10534
Year of manufacture: 2017
Condition of Machine: Excellent

Specifications
Machine Type/Description: Radial Arm Drill
Capacity: Drilling: 55/45 (2-1/4" / 1-3/4"), Boring: 150/100 (6" / 4"), Tapping: 38/25 (1-1/2" / 1")

Table Size: 750mm L x 500mm W x 400mm H
Spindle Motor Power Rating: 2200 W
SSpindle RPM: Min 41 RPM - Max 1524 RPM
Spindle Taper Size: Cat40
Tool Changer Type: carousel
Tool Changer Capacity : 20

Features & Included Equipment

- Gearbox with automatic lubrication

- Double tube column

- Drilling depth setting

- 9 stages of speed

- Safety feeding device

Tool set - 1 set

Drilling oil pump - 1 set

Table - 1 set

Price: $19,000
Contact:
Payam Lotfi
Westview Technologies Inc.

info@westviewtech.ca

604-904-2223

Westview Technologies Inc. Kao Ming KMR-1100SWestview Technologies Inc. Kao Ming KMR-1100SWestview Technologies Inc. Kao Ming KMR-1100S
Westview Technologies Inc. Kao Ming KMR-1100SWestview Technologies Inc. Kao Ming KMR-1100SWestview Technologies Inc. Kao Ming KMR-1100S

Haas TM2P

Serial Number: 1086195
Year of manufacture: 2011
Condition of Machine: Excellent, perfect working order

Specifications
Travels: X 40" , Y 16" , Z 16"
Table Size : Length 57.75” Width 10.5"
Spindle Motor Power Rating: 7.5”
Spindle RPM: 6000
Spindle Drive System: Vector drive
Spindle Taper Size: Cat40
Tool Changer Type: carousel
Tool Changer Capacity : 20

Features & Accesories

-Renishaw Tool offset, and parts offset probes

-Power outage shutdown module

-Rigid tapping

-auger chip removal

-programmable coolant nozzle

-20 tool changer

-some tool holders included

-spare parts accessories.

-Remote Jog Handle/Control

Price: USD $35,000
Contact:
Trevor Adams
Kraken Built

Trevor@krakenBuilt.com

604-771-6158

TM2P 2TM2P 2TM2P 2

Johnford ST-70DH

Serial Number: TCC180075
Year of manufacture: 2018
Condition of Machine: New

Specifications
Swing overbed/Front cover: 36.2”
Standard turning diameter: 27.5”
Swing over carriage: 27.5”
Maximum cross travel (X axis): 14.6”
Distance between centers: 67”
Spindle motor: 50HP
Spindle nose: A2-15
Spindle RPM: 0-100
Hole through spindle/Spindle Bore: 7.28
Turret tool positions: 12

Features & Accesories
60-degree slant bed
Chip conveyor
Hydraulic, programmable tailstock body & quill, MT5
Rotary Tailstock
Fanuc OiT-F CNC Control
Manual Guidance i Conversational
Provision for front and rear mount Chucks (Chucks Not Included)

Price: USD $209,995 
Contact:
Peter Dahl
Thomas Skinner & Son

pdahl@tskinner.com

1-800-567-2131

//www.thomasskinner.com/wp-content/uploads/2023/06/ST-70DH-Exterior-1.png//www.thomasskinner.com/wp-content/uploads/2023/06/ST-70DH-Inside-3.png//www.thomasskinner.com/wp-content/uploads/2023/06/ST-70DH-Inside-1-e1686249944786.png
//www.thomasskinner.com/wp-content/uploads/2023/06/ST-70DH-Rear-Spindle-e1686249798206.png//www.thomasskinner.com/wp-content/uploads/2023/06/ST-70DH-Inside-2.png//www.thomasskinner.com/wp-content/uploads/2023/06/ST-70DH-Rear-Spindle-2.png

Doosan MX2500 LST MTM lathe

Serial Number: X25LST0112
Year of manufacture: 2008
Condition of Machine:

• Fanuc 18i controller

• B-axis milling head

• 12 station lower turret

• Dual 12” chucks

• 40 tool internal magazine

• Newly replaced spindle and milling head

• Upgraded coolant pump

• Way covers replaced

• BMT 65 lower turret with driven motor for live tooling

• Replaced rotating union

• Chip conveyor

• Parts catcher with conveyor

Video

Price: Negotiable
Contact:
Christian Roth
BD Diesel Performance

Christian.roth@bddiesel.com

1-800-887-5030 Ext: 110

Doosan MX2500 LST MTM latheDoosan MX2500 LST MTM latheDoosan MX2500 LST MTM lathe
Doosan MX2500 LST MTM latheDoosan MX2500 LST MTM latheDoosan MX2500 LST MTM latheDoosan MX2500 LST MTM lathe
Thomas Skinner